Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Torque Converter Vibration Test
TORQUE CONVERTER VIBRATION TEST1. Start the engine.
2. With the engine at idle speed and the transmission in Park or Neutral, observe the vibration.
3. Turn the key off.
REMOVAL PROCEDURE
1. Remove the bolts attaching the flexplate shield.
2. Remove the bolts attaching the flexplate to the torque converter.
3. Rotate the torque converter 120 degrees.
INSTALLATION PROCEDURE
1. Install the flexplate to the torque converter.
Secure with the attaching bolts.
- Tighten the bolts to 44 Nm (33 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the flexplate shield. Secure with attaching bolts.
- Tighten the bolts to 7 Nm (60 inch lbs.).
Start the engine and check for vibration. Repeat the procedure until you obtain the best possible balance.