Front Seat Trim Panel Replacement

Front Seat Trim Panel Replacement

Removal Procedure

1. Ensure the seat is in the full upward position.




2. Remove the screws retaining the seat back release handle and the seat recliner handle and remove the handles.
3. Remove the remaining screws retaining the trim panel to the seat.
4. Remove the trim panel from the seat.

Installation Procedure

1. Position the trim panel on the seat.
Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.




2. Install the screws retaining the trim panel to the seat.

Tighten the screws to 2 Nm (18 lb in).

3. Install the remaining screws retaining the seat back release handle and the seat recliner handle to the seat.

Tighten the screws to 2 Nm (18 lb in).