Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (Non-HP2)

Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (Non-HP2)

Special Tools

J 39400-A Halogen Leak Detector

Removal Procedure




1. Disconnect the electrical connector from the A/C refrigerant pressure sensor.
2. Remove the A/C refrigerant pressure sensor (1) from the condenser tube.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the A/C refrigerant pressure sensor (1).

Tighten the switch to 6 Nm (53 lb in).

2. Connect the electrical connector to the A/C refrigerant pressure sensor.
3. Leak test the fittings of the components using the J 39400-A .
4. Lower the vehicle.