Battery Negative Cable Replacement

Battery Negative Cable Replacement

Removal Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.





2. Remove the battery ground cable nut (1).

3. Remove the battery negative cable (2).





4. Disconnect the wiring harness current sensor plug (4).

5. Remove the current sensor (5) from the battery tray.

6. Remove battery ground cable from the battery negative cable nut (2).

7. Remove the ground cable (3).

8. Remove the battery negative cable (1).





9. Remove the current sensor (2) from the battery negative cable (1).

Installation Procedure





1. Install the current sensor (2) to the battery negative cable (1).





2. Install the battery negative cable (1).

3. Install the ground cable (3).

Caution:
Refer to Fastener Caution Fastener Caution.

4. Install the battery ground cable to the battery negative cable nut (2) and tighten to 9 Nm (80 lb in).

5. Install the current sensor (5) at the battery tray.

6. Connect the wiring harness current sensor plug (4).





7. Install the battery negative cable (2).

8. Install the battery ground cable nut (1) and tighten to 9 Nm (80 lb in).

9. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.