Evaporative Emission Line Replacement - Engine

Evaporative Emission Line Replacement - Engine

Removal Procedure

Important: Clean the evaporative emission (EVAP) line connection and surrounding areas before disconnecting in order to avoid possible EVAP system contamination.





1. Disconnect the EVAP canister purge solenoid valve tube quick connect fitting (2) from the chassis EVAP line. Refer to Plastic Collar Quick Connect Fitting Service Procedures.




2. Disconnect the EVAP canister purge solenoid valve tube quick connect fitting (1) from the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service Procedures.
3. Remove the EVAP canister purge solenoid valve tube.
4. Cap the EVAP canister purge solenoid valve and the chassis EVAP pipe in order to prevent possible EVAP system contamination.

Installation Procedure




1. Remove the caps from the EVAP canister purge solenoid valve and the chassis EVAP pipe.
2. Position the EVAP canister purge solenoid valve tube.
3. Connect the EVAP canister purge solenoid valve tube quick connect fitting (1) to the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service Procedures.




4. Connect the EVAP canister purge solenoid valve tube quick connect fitting (2) to the chassis EVAP line. Refer to Plastic Collar Quick Connect Fitting Service Procedures.