Front Fascia - Removal

REMOVAL





1. Release hood latch and open hood.
2. Hoist vehicle and support with safety stands.
3. Remove front wheelhouse splash shields fasteners (6&7) as necessary to gain access to bolts attaching front fascia to fender (5).Front Wheelhouse Splash Shield - Removal.
4. Remove the two bolts (4) and two push pins (3) attaching fascia to the upper core support.




5. Remove push pins (1) attaching the fascia (3) to the lower support (2).




6. Disconnect fog lamp wire connectors (2), if necessary.




7. Disconnect the electrical wiring harness (1), if equipped at the front rail support.




8. Disconnect head lamp washer hose from washer pump BUX only.
9. Lower vehicle.
10. Remove grille/bumper fascia (1) from vehicle.