Quarter Trim Panel - Removal

REMOVAL





1. Open liftgate.
2. Using a trim stick or equivalent, remove the liftgate scuff plateLiftgate Sill Scuff Plate - Removal.
3. Using a trim stick or equivalent, remove the upper D-pillar trimRemoval.
4. Using a trim stick or equivalent, remove the quarter trim bolsterRemoval.
5. Remove the third row lower seat belt webbing anchor (4).
6. Right quarter trim only - remove the second row seat belt webbing anchor bolt.
7. Remove the third row upper turning loop anchor bolt.
8. Remove the six quarter trim retaining screws.
9. Pull trim from inner quarter panel (1).
10. Left quarter trim only - Disconnect the auxiliary power outlet and power inverter (2) wire harness connectors (3) (if equipped).
11. Remove the quarter trim panel (5).