Instrument Panel Glove Box - Installation

INSTALLATION

UPPER GLOVE BOX





1. Position the upper glove box door into the upper glove box cavity.

2. Install the fasteners (1, 2) to the upper glove box door (1). Tighten the fasteners securely.





3. If equipped, install the USB connector to the upper glove box and position the glove box (1) into the cavity. Make sure all the retaining clips are engaged.

4. Install the fasteners (2, 3, 4, 5, 6) from the upper glove box (1). Tighten the fasteners securely.





5. Install the trim bezel (2) to the instrument panel.

6. Install the fasteners (1) to the instrument panel trim bezel (2). Tighten the fasteners securely.

7. Close the upper glove box door.

LOWER GLOVE BOX





1. Place the lower glove box door (1) into position and engage the hinges.

2. Raise the door while pressing in on both sides until the stops engage in the panel opening.

3. Close the glove box (1).