Instrument Panel Glove Box - Removal

REMOVAL

Special Tools:






UPPER GLOVE BOX





1. Open the upper glove box door.

2. Remove the fasteners (1) from the instrument panel trim bezel (2).

3. Using Trim Stick (C-4755) or equivalent, remove the trim bezel (2) from the instrument panel.





4. Remove the fasteners (2, 3, 4, 5, 6) from the upper glove box (1).

5. Using Trim Stick (C-4755) or equivalent, remove the upper glove box (1) from the instrument panel.

6. If equipped, remove USB connector from the upper glove box.





7. Remove the fasteners (1, 2) from the upper glove box door (1).

8. Using Trim Stick (C-4755) or equivalent, remove the upper glove box door (1) from the instrument panel.

LOWER GLOVE BOX





1. Open the lower glove box door (1).

2. While pressing on both sides of the door pull the door down until stops are disengaged from the lower IP panel.

3. Carefully disengage the bottom hinges and remove the door (1).