Instrument Panel End Cap

REMOVAL

Fig.10 Instrument Panel End Cover:

1. Open the left door and pull on the access handle to disengage the end cap clips.Fuse diagram is located inside the left end cap.Fuse Access is under the left end cap.
2. Open the right door and remove the right end cover by inserting a trim stick (special tool #C-4755), between cap and instrument panel to disengage clips.

INSTALLATION
1. Pull body mounted weatherstrip form fence along the side of the instrument panel.
2. Align the end cap with the retaining slots in instrument panel and firmly snap into place.
3. Engage weatherstrip along the header and down the A-pillar
4. Verify weatherstrip sealing
5. Close door