Airbag System Verification Test

*AIRBAG VERIFICATION TEST

Remove any special tools or jumper wires and reconnect all previously disconnected components - except the Battery.

WARNING: To avoid serious or fatal injury, turn the ignition on, then reconnect the battery

With the scan tool, erase all Diagnostic Trouble Codes (DTCs) from the airbag system module.
Turn the ignition off, and wait 15 seconds.
Turn the ignition on, and with the scan tool, confirm that no DTCs are present and that all components are functioning properly.
If there are no DTCs present and all components are functioning properly, the repair is complete.
Are any DTCs present?

Yes

- Repair is not complete, refer to appropriate procedure.

No

- Repair is complete.