Rear Spoiler Verification Test

REAR SPOILER VERIFICATION TEST

REAR SPOILER VERIFICATION TEST

Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
Operate the Spoiler Switch to fully extend the spoiler.
Operate the Spoiler Switch to fully retract the spoiler.
Drive the vehicle at 89 km/h (55 MPH) and verify the spoiler operation.
With the scan tool, confirm that no DTCs are present and that all components are functioning properly.
If a DTC is present, select the corresponding procedure.
Are any DTCs present?

YES

- Repair is not complete, refer to appropriate procedure.

NO

- Repair is complete.