Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Handle >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION

ASSEMBLY





1. Install the liftgate release handle assembly on the latch bracket. Install the retaining bolt (1). Tighten to 8 Nm (71 in. lbs.).




2. Connect the rear liftgate release handle linkage (1).

INSTALLATION





1. Connect the pneumatic harness connector (2) and the harness connector (1) to the rear latch assembly.




2. Install the rear latch assembly into the rear liftgate. Install the retaining bolts (1). Tighten to 8 Nm (71 in. lbs.).




3. Install the rear latch assembly bracket and then install the seven retaining nuts and bolts (1). Tighten to 8 Nm (71 in. lbs.).




4. Connect the rear spoiler harness connectors (1).
5. Install the rear liftgate trim panel. Service and Repair.
6. Connect the negative battery cable.

pro multis · About Operation CHARM