Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Radiator >> Service and Repair >> Removal and Replacement >> Radiator - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator - Removal







REMOVAL





1. Disconnect the negative battery cable.
2. Remove the radiator fan. Radiator Fan - Removal.
3. Drain the cooling system. Service and Repair.
4. Remove the air cleaner inlet tubes.




5. Disconnect the upper radiator hose (1).




6. Disconnect the lower radiator hose (2).
7. Disconnect the coolant recovery reservoir hose (1).
8. Disconnect the transmission cooler line (3) located on the right side of the radiator (automatic transmission only). Removal.




9. Disconnect the transmission cooler line (1) located in the middle front of the vehicle (automatic transmission only).



Using a suitable tool, grasp the radiator hold down clamps (2) and pull up to remove the clamps from the mounting holes.




10. Remove the condenser retaining bolts (1) from the radiator support.
11. Carefully lean the radiator back toward the engine.
12. Gently lift and remove the radiator from the vehicle.
pro multis · About Operation CHARM