Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Intake Manifold - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Intake Manifold - Installation







INSTALLATION

1. Clean the gasket surfaces of the cylinder heads and the intake manifold.




2. Position the intake manifold (1) on the cylinder heads with new gaskets (2) in place.
3. Install the intake manifold bolts and tighten to 20 Nm (15 ft. lbs.).
4. Install the air pump switchover valves (4). Tighten the bolts to 20 Nm (15 ft. lbs.).




5. Connect the EGR pipe fitting (1) to the EGR valve (2). Tighten the EGR pipe fitting to 40 Nm (30 ft. lbs.).
6. Install the mass air flow sensor. Installation.
7. Connect the engine harness connectors.
8. Connect the vacuum lines at the crankcase ventilator, purge valve, EGR valve, and the brake booster.
9. Install the fuel rail with fuel injectors. Fuel Injector - Installation.
10. Install the air cleaner housing. Air Cleaner Housing - Removal.
11. Connect the negative battery cable.
12. Start the engine and check for leaks.
pro multis · About Operation CHARM