Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Valve Body >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





NOTE: If valve body assembly is being replaced or reconditioned, the "Quick-Learn" procedure must be performed Quick Learn Procedure.

1. Install valve body assembly to transaxle.




2. Install and torque valve body-to-transaxle case bolts to 12 Nm (105 in. lbs.).




3. Install transaxle oil filter. Inspect the o-ring and replace if necessary.




4. Ensure the transaxle oil pan and transaxle case sealing surfaces are clean and dry. Install an 1/8" bead of Mopar(R) Silicone Rubber Adhesive Sealant to the oil pan and install.




5. Torque oil pan-to-transaxle case bolts to 19 Nm (165 in. lbs.).
6. Lower vehicle.
7. Connect transmission range sensor connector.
8. Install manual valve lever to manual shaft.
9. Install gearshift cable to manual valve lever.
10. Connect battery negative cable.
11. Fill transaxle with Mopar(R) ATF +4 Transmission fluid. Fluid Level and Condition Check - 40/41TE
pro multis · About Operation CHARM