Seat - Installation

INSTALLATION





CAUTION: Do not handle by seat adjuster release bar.

NOTE: Ensure that the seat tracks are rearward. Ensure the seat tracks on the right and left are in equal latch positions.

1. Place front seat in position in vehicle.
2. Connect front seat wire harness connector (3) to body harness connector (2).




3. Install bolts (2) to attach front of seat track to the floor kick up. Tighten bolts to 65 Nm (48 ft. lbs.) torque.
4. Slide seat (1) forward and install bolts attaching rear of seat track to the floor. Tighten bolts to 65 Nm (48 ft. lbs.) torque.




5. Install seat belt anchor bolt (3) through seat belt (2) and snap seat belt anchor cover to seat cover side shield (4).
6. Verify front seat operation.