Removal

REMOVAL





1. Remove the rear transmission bracket to transmission bolts.
2. Remove crossmember Service and Repair.
3. Remove right halfshaft assembly. Half Shaft - Removal
4. Remove the exhaust and rear maniverter from engine Catalytic Converter - Removal.
5. Remove propeller shaft assembly. Propeller Shaft - Removal.




6. Remove the one upper bolts (1) and clips (2) at the heat shield (3).




7. Remove the lower heat shield bolt (2) and remove the heat shield (1).




8. Remove PTU-to-bracket lower bolts (2).
9. Roll engine and transmission forward.
10. Remove PTU (1) from vehicle.