Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> 300 V6-3.5L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Service and Repair >> Headlamp Unit - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Unit - Installation






INSTALLATION






NOTE: If the headlamp leveling module (HID translator module) or sensors are replaced, the system needs to be calibrated using a Scan Tool.

1. Position the headlamp unit in the opening in the headlamp mounting cross-member.
2. Connect the electrical connector.





3. Install the one lower headlamp unit retaining screw.

NOTE: If the fascia was loosened, reattach it Front Bumper Fascia - Installation .






4. Install the two upper retaining screws (1).
5. Connect the battery negative cable.
6. Using a Scan Tool, calibrate the headlamp levelling system.

INSTALLATION - CHARGER





NOTE: If the headlamp leveling module (HID translator module) or sensors are replaced, the system needs to be calibrated using a Scan Tool.

1. Position the headlamp unit in the opening in the headlamp mounting cross-member.
2. Connect the electrical connector.





3. Install the one lower headlamp unit retaining screw.





4. Install the two upper retaining screws (1).





5. Install front fascia Front Bumper Fascia - Installation.
6. Connect the battery negative cable.
7. Using a Scan Tool, calibrate the headlamp levelling system.
pro multis · About Operation CHARM