Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Duct >> Service and Repair >> Floor Distribution Duct - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Floor Distribution Duct - Installation






INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

RIGHT FRONT FLOOR DUCT






NOTE: Illustration shown with instrument panel removed for clarity.

1. Connect the right floor duct (1) to the right side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. On LHD models, install the glove box bin Instrument Panel Glove Box - Installation.

LEFT FRONT FLOOR DUCT






NOTE: Illustration shown with instrument panel removed for clarity.

1. Connect the left floor duct (1) to the left side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
2. Install the screw (4) that secures the left floor duct to the HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
3. On LHD models, connect the shift interlock cable (3) to the left floor duct.
4. On RHD models, install the glove box bin Instrument Panel Glove Box - Installation.

REAR FLOOR DISTRIBUTION DUCTS





1. Connect the left rear floor distribution duct (1) and the right rear floor distribution duct (2) as required to the HVAC housing (3). Make sure the ducts are fully engaged to the housing.
2. Install the rear seat floor ducts.
3. Install the instrument panel Instrument Panel - Installation.

REAR SEAT FLOOR DUCTS






NOTE: Right side rear floor duct shown. Left side duct similar.

1. Connect the rear seat floor duct (2) to the rear floor distribution duct (3). Make sure the ducts are fully engaged to each other.
2. Engage the retainer that secures the rear seat floor duct to the floor support (4) and install the retaining screw (1). Tighten the screw to 2.2 Nm (20 in. lbs.).
3. Reinstall the carpet Carpet - Installation.
4. Install the front seat to the side of the vehicle being serviced Seat - Installation.
5. Install the center floor console Shifter Housing - Installation.

pro multis · About Operation CHARM