Antilock Brakes / Traction Control Systems: Testing and Inspection
*REPLACING THE ANTILOCK BRAKE MODULEPossible Causes
- REPLACING THE ANTI-LOCK BRAKE MODULE
Diagnostic Test
1. REPLACING THE ANTILOCK BRAKE MODULE
NOTE: Note: It may be necessary to call STAR to order a new ABS module.
NOTE: Note: Failure to properly program the ABS module will result in an illuminated or blinking ABS indicator.
Turn the ignition off.
Replace the Anti-lock Brake Module in accordance with the Service Information.
With the scan tool, perform the module configuration procedures as necessary in accordance with the Service Information.
Road test the vehicle above 40 m.p.h. for at least two minutes.
With the scan tool, select View DTCs in the Anti-Lock Brake Module.
Are there any DTCs present?
Yes >> Perform the appropriate diagnostic procedure(s).
No >> Test Complete
Perform ABS VERIFICATION TEST - VER 1. ABS Verification Test