Air Outlets - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could result in an accidental airbag deployment and possible personal injury or death.





1. Disconnect and isolate the negative battery cable.
2. Remove the defroster grille Removal.
3. Depending on the air outlet being serviced, remove the instrument cluster bezel or passenger side air bag Instrument Panel Cluster Bezel - Removal or Passenger Air Bag - Removal.
4. Remove the A-pillar trim molding from the side of the vehicle being serviced A-Pillar Trim Panel-Removal.
5. Remove the screw (1) that secures the top of the air outlet (2) to the instrument panel (4).
6. Using a trim stick C-4755 or equivalent (3), gently pry the lower portion of the air outlet rearward to disengage the two metal retaining clips from the instrument panel and remove the outlet.
7. If required, carefully disengage the plastic retaining tabs that secure the air outlet grille to the back of air outlet and remove the grille from the outlet.