Speaker - Removal
REMOVAL
FRONT DOOR SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove the front door trim panel Front Door Trim Panel - Removal.
3. Remove speaker mounting fasteners.
4. Disconnect the electrical connector and remove the speaker.
INSTRUMENT PANEL CENTER SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover screw covers.
3. Remove the instrument panel top cover screws.
4. Remove the instrument panel top cover.
5. Remove the speaker mounting fasteners.
6. Disconnect the electrical connector and remove the speaker.
INSTRUMENT PANEL END SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover Instrument Panel Cover - Removal.
3. Remove the speaker mounting fasteners.
4. Disconnect the electrical connector and remove the speaker.
REAR CAB SIDE SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove the B-pillar lower trim B-Pillar Trim Panel - Removal.
3. Remove the speaker mounting fasteners.
4. Disconnect the electrical connector and remove the speaker.
REAR DOOR SPEAKER
1. Disconnect and isolate the battery negative cable.
2. Remove the rear door trim panel Rear Door Trim Panel - Removal.
3. Remove the speaker mounting fasteners.
4. Disconnect the electrical connector and remove the speaker.
SUBWOOFER - REGULAR CAB
1. Disconnect and isolate the battery negative cable.
2. Remove the mounting fasteners to the subwoofer housing.
3. Disconnect the electrical connector.
4. Remove subwoofer from vehicle.
SUBWOOFER - QUAD CAB
1. Disconnect and isolate the battery negative cable.
2. Raise right rear seat to access the subwoofer.
3. Remove the mounting fasteners.
4. Disconnect the electrical connector and remove the subwoofer.
HEADLINER MOUNTED SPEAKER - QUAD CAB
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick, remove the speaker cover (1) from the headliner (2).
3. Remove the two retainers holding the speaker (1) into the headliner (2).
4. Disconnect the electrical connector and remove the speaker.