Installation

INSTALLATION





1. Attach the parking brake cable to the actuator (6) and position the shoes on the support plate. Be sure shoes are properly engaged in the parking brake actuator, parking brake cable is attached, and the rear spring is still properly connected.
2. Install the hold down clips and pins (4).
3. Install the adjuster (3).
4. Install the shoe to shoe return spring (2, 5).





5. Connect the rear RH and LH parking brake cables (2, 5) to the parking brake equalizer (1).
6. Install rotor and brake calipers Brake Rotor - Installation.
7. Adjust the parking brake shoes Adjustments
8. Install wheels Service and Repair.
9. Remove the supports and lower the vehicle.
10. Pump brake pedal until caliper pistons and brake pads are seated and a firm brake pedal is obtained
11. Verify correct parking brake operation.