Instrument Panel Demister Duct - Installation

INSTALLATION

NOTE: Take the proper precautions to protect the face of the instrument panel cover from cosmetic damage while performing this procedure.






NOTE: If the foam seal on an air outlet is deformed or damaged, the seal must be replaced.

1. Connect the right side instrument panel demister duct (2) to the center demister duct (1).
2. Install the screw (3) that secures the right side instrument panel demister duct to the center duct. Tighten the screw securely.






NOTE: If the foam seal on an air outlet is deformed or damaged, the seal must be replaced.

3. Connect the left side instrument panel demister duct (3) to the center demister duct (1).
4. Install the screw (2) that secures the left side instrument panel demister duct to the center duct. Tighten the screw securely.
5. Install the instrument panel cover Instrument Panel Cover - Installation.