Air Cleaner Body - Installation

INSTALLATION





1. Install the air cleaner body (1) straight down on the locating pins while routing the air inlet under the hood seal (2).
2. Install the push pin (3).
3. Engage the hose retainer (5) to the air cleaner body.
4. Install the fresh air makeup hose (4) to the air cleaner body.





5. Install the resonator (3) to the air cleaner body and the throttle body. Tighten the clamps (1) and (4) to 4 Nm (35 in. lbs.).
6. Connect the electrical connector (2) to the Inlet Air Temperature (IAT) sensor.





7. Install the engine cover (1).
8. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).