Front Seat - Installation

INSTALLATION

Driver Side





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Install the driver seat and loosely install the front bolts (1).
3. Loosely install the driver seat rear bolts (2).





4. Tighten the driver seat bolts to 47 Nm (35 ft. lbs.) using the sequence shown.





5. Connect the electrical connectors (1 and 2), if equipped.





6. Install the trim cover (1) and seat the clip fully.

Passenger Side





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Position the passenger seat assembly into the vehicle and connect the air duct (1), if equipped.





3. Loosely install the passenger seat front bolts (3).
4. If equipped with the center seat, loosely install the bolts (2).
5. Loosely install the passenger seat rear bolts (1).





6. Tighten the passenger seat bolts to 47 Nm (35 ft. lbs.) using the sequence shown.





7. Connect the electrical connectors (1), if equipped.





8. Secure the jack cover rear hook on the rear riser (3).
9. Position the front of the side shield (2) on the front of the riser (1) and seat the clip fully.