Fog Lamp Bulb - Removal

BULB

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Disconnect and isolate the battery negative cable.
2. Reach under and behind the front bumper or fascia to access the back of the fog lamp housing (1) on the back of the bumper or fascia.
3. Disconnect the fog lamp jumper wire harness connector (3) from the fog lamp bulb (2) connector receptacle.
4. Firmly grasp the bulb on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the bulb straight out from the keyed opening in the housing.