Battery Tray - Installation

INSTALLATION






1. Position the battery tray assembly (1) and install the retaining bolts (2).

2. Connect the left front fender ground wire.

3. Install the cruise servo (3) (if equipped) and retaining screws.

4. Install the left front wheelhouse splash shield Splash Shield - Installation.





5. Install the anti-lock brake controller (if equipped).

6. Install the purge solenoid (6) on its mounting bracket.

7. Connect the wire harness retainers on the battery tray assembly.

8. Install the Power Distribution Center (PDC) (5).

9. Install the battery (3) Battery - Installation.