Steering Column: Service and Repair

STEERING LOCK BRACKET/STEERING LOCK CYLINDER REMOVAL
If it is necessary to remove the steering lock cylinder, use a hacksaw to cut the special bolts at the steering lock bracket side.






REASSEMBLY SERVICE POINTS
STEERING LOCK CYLINDER/STEERING LOCK __ BRACKET/SPECIAL BOLTS INSTALLATION
(1) When installing the steering lock and steering lock bracket to the column tube, temporarily install the steering lock in alignment with the column boss.
(2) After checking that the lock works properly, tighten the special bolts until the head twists off.

Caution: The steering lock bracket and bolts must be replaced with new ones when the steering lock Is Installed.