Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2010 >> Charger V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Front Seat - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seat - Installation






INSTALLATION

WARNING: Handled seats carefully when servicing. Be careful not to drop seats on the workbench or floor. If dropped, the seat position sensor may become damaged and inoperative. Failure to follow these instructions may result in serious or fatal injury.

NOTE: Typical left side seat shown in illustrations. Right side seat similar.





1. Place the seat into the vehicle and connect the electrical connectors.
2. Install the two bolts (1) that secure the front of the seat to the body. Tighten the bolts to 70 Nm (52 ft. lbs.).





3. Reconnect the negative battery cable.
4. Move the seat full forward.
5. Install the two bolts (1) that secure the rear of the seat to the body. Tighten the bolts to 70 Nm (52 ft. lbs.).





6. Install the lower seat belt anchor (3) onto the stud located on the seat cushion frame.
7. Install the nut (2) that secures the lower seat belt anchor to the stud. Tighten the nut to 37 Nm (27 ft. lbs.).
8. Install the trim cover (1).
9. Perform the supplemental restraint system verification test Service and Repair.

pro multis · About Operation CHARM