Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2011 >> Challenger SRT-8 V8-6.4L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Starter - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter - Installation






6.4L





1. Position the starter (2) into the transmission but do not install bolts.
2. Connect the solenoid wire to the starter motor (snaps on).
3. Position the battery cable to the solenoid stud. Install the battery cable eyelet nut. Tighten to 11 Nm (8 Ft. Lbs.).
4. Install the three mounting bolts (1).Tighten to 54 Nm (40 Ft. Lbs.).





5. Position the heat shield (3) and install the two shield mounting nuts (2).
6. Lower the vehicle.
7. Connect the negative battery cable.

8. Start the engine to verify the starter functions properly.
9. Turn the ignition off.
pro multis · About Operation CHARM