Ignition Coil - Removal

3.6L





1. Disconnect and isolate the negative battery cable (1).





2. Lift the engine cover retaining grommets off the ball studs and remove the engine cover (1).





3. If removing the ignition coils from cylinders 1, 3 or 5 on the right side of the engine, first remove the air inlet hose (5) Air Cleaner Body - Removal.




4. If removing the ignition coils from cylinders 2, 4 or 6 on the left side of the engine, first remove the air inlet hose, upper intake manifold (2) and insulator Intake Manifold - Removal.






NOTE: The left side ignition coils are shown, the right side ignition coils are similar.

5. Unlock and disconnect the electrical connector (1) from the ignition coil.
6. Remove the ignition coil retaining bolt (3).

7. Pull the ignition coil (2) from cylinder head cover opening with a slight twisting action.