Intake Manifold - Removal

REMOVAL





1. Perform the fuel system pressure release procedure Service and Repair.
2. Disconnect the negative battery cable (1).





3. Remove the engine covers (1).
4. Disconnect the fuel supply line Service and Repair.





5. Remove the air cleaner housing (5) Air Cleaner Body - Removal.
6. Disconnect the brake booster hose and the EVAP purge hose.





7. Disconnect the electrical connectors from the following components:
- Manifold Absolute Pressure (MAP) Sensor
- Short Runner Valve (SRV)
- Fuel Injectors
- Electronic Throttle Control (ETC )

NOTE: Remove the intake manifold and throttle body as an assembly.

8. Using the sequence shown, remove the intake manifold retaining bolts.
9. Remove the intake manifold and throttle body as an assembly from the vehicle.