Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Challenger V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair >> Air Cleaner Body - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Body - Installation






INSTALLATION





1. Position the air cleaner housing (3) into the vehicle.
2. Install the air cleaner housing retaining bolt (2) and tighten to 4 Nm (35 in. lbs.).
3. Connect the fresh air makeup hose (1) onto the air cleaner housing.





4. Position the air inlet hose assembly (5), connect the air inlet hose to the throttle body and the air cleaner housing.
5. Secure the air inlet hose assembly retaining grommet onto the ball stud (4).
6. Tighten the clamp (3) at the air cleaner housing to 4 Nm (35 in. lbs.).
7. Tighten the clamp (2) at the throttle body to 4 Nm (35 in. lbs.).
8. Connect the electrical connector (1) to the Inlet Air Temperature (IAT) sensor.





9. Position the engine cover (1) and secure the retaining grommets to the ball studs.





10. Connect the negative battery cable and tighten nut (1) to 5 Nm (45 in. lbs.).

pro multis · About Operation CHARM