Radio - Removal
REMOVAL
Special Tools:
1. Disconnect and isolate the battery negative cable.
2. Using (C-4755) or equivalent, pull the center bezel (2) from the instrument panel (1) by releasing the snap retainers from the instrument panel.
3. Disconnect the center bezel electrical connectors.
4. Remove the center bezel from the vehicle.
5. Remove the radio mounting fasteners (1).
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
6. Pull the radio out far enough to access the back of the radio.
7. Disconnect the AM/FM antenna (2) and electrical connectors (1).
8. If equipped, disconnect the navigation antenna (3).
9. If equipped, disconnect the USB connectors (4).
10. Remove the radio from the instrument panel.