Rear Bumper Fascia - Installation

INSTALLATION










1. Carefully remove the rear fascia from the vehicle and disconnect the electrical connectors.
2. Carefully pull the left and right side of the rear fascia outward, disengaging the fascia from the fender (2) mounted mounting brackets.
3. Remove the upper fascia push pin retainers (6).
4. Install the mounting fasteners in the wheel wells.
5. Install the lower rear fascia (4) mounting fasteners located under the vehicle.
6. Install the left and right upper fasteners.
7. Install the left and right rear tail lamps. Tail Lamp - Installation.
8. Install the rear splash shields, as necessary. Splash Shield - Installation.
9. Lower the vehicle.