Operation CHARM: Car repair manuals for everyone.
Home >> Fiat >> 2012 >> 500 L4-1.4L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor Linkage >> Service and Repair >> Wiper Arm Linkage - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Arm Linkage - Removal





REMOVAL






NOTE: The front wiper motor can be removed from the wiper linkage module and is serviced independently from the remainder of the wiper linkage module for this vehicle. Front Wiper Motor - Removal.

1. Disconnect and isolate the battery negative cable.
2. Remove both front wiper arms from the wiper pivots. Front Wiper Arm - Removal.
3. Remove the cowl plenum cover/grille panel from over the front wiper linkage module. Cowl Panel Cover - Removal.
4. Remove the two screws (3) that secure the module bracket to the cowl plenum.
5. Disengage the knob-like rubber insulator from the hole in the rearward wall of the cowl plenum.
6. Disconnect the wire harness connector (2) from the connector receptacle for the front wiper motor.
7. Disengage the wire harness retainer (1) from the linkage module bracket.
8. Remove the front wiper linkage module from the cowl plenum as a unit.

pro multis · About Operation CHARM