Floor Console - Removal

REMOVAL

Special Tools:










1. Disconnect the negative battery cable.
2. Remove the screw (2) from the left side floor console panel (1).
3. Using trim stick (C-4755), disengage the rear retaining tabs and remove the left side floor console panel (1).





4. Remove the screw (1) securing the front floor console to the lower instrument panel bezel. Repeat for the opposite side.





5. Remove the screw (2) from the right side floor console panel (1).
6. Using trim stick (C-4755), disengage the front floor console to floor console panel retaining clips.
7. Pull the floor console panel rearward to disengage the retaining clip in the floor.
8. Remove the right side floor console panel (1) from the vehicle.





9. Position the parking brake handle up fully.
10. Remove the rear cupholder mat (2).
11. Remove the rear retaining nut (3) located in the rear cupholder cavity.
12. Pull the rear floor console rearward to disengage the front to rear floor console retaining clips/tabs.
13. Slide the rear floor console (1) over the parking brake handle and remove from the vehicle.





14. Remove the front cupholder mat (2).
15. Remove the retaining nuts (1) located in the cupholder cavity and in the rear of the front floor console (4).
16. Pull the front floor console rearward slightly and disconnect the 12V power harness (3).
17. Remove the front floor console (4) from the vehicle.