Test L: DTCs C1701, C1704, C1707 and C1710 - Sensor Circuit Fault

PINPOINT TEST L: DTCS C1701, C1704, C1707 AND C1710 - SENSOR CIRCUIT FAULT

Normal Operation
The parking aid system is enabled when the ignition switch is in the RUN position and the REVERSE (R) gear is selected. The parking aid module (PAM) calculates the distance to an object by the use of 4 ultrasonic sensors mounted in the rear bumper. The parking aid sensors can detect obstructions in the path behind the vehicle.







This pinpoint test is intended to diagnose the following:
- Dirty or obstructed parking aid sensor
- Wiring, terminals or connectors
- Parking aid sensor
- Parking aid bumper harness
- PAM

L1:

L2-L6: