Crankshaft Main Bearing: Specifications
Vertical Main Bearing Cap FastenersDiscard the fasteners.
First pass 40 Nm (30 lb-ft).
Final pass Tighten an additional 90°
Jack Screws
Discard the screws.
First pass 5 Nm (44 lb-in).
Final pass 10 Nm (89 lb-in).
Side Bolts 21 Nm (15 lb-ft).
Discard the bolts.
Crankshaft
Main bearing journal
Diameter 67.481-67.505 mm (2.6567-2.6576 in)
Maximum taper 0.004 mm (0.0002 in)
Maximum out-of-round 0.0075 mm (0.0003 in) between cross sections
Clearance-to-cylinder block 0.048-0.024 mm (0.0019-0.0009 in)
Connecting rod journal
Diameter 53.003-52.983 mm (2.0867-2.0859 in)
Maximum taper 0.004 mm (0.0002 in)
Maximum out-of-round 0.0075 mm (0.0003 in) between cross sections
Maximum end play 0.075-0.377 mm (0.0030-0.0148 in)
Main bearing bore inside diameter 72.400-72.424 mm (2.850-2.851 in)