Oil Pressure Sender: Service and Repair

Engine Oil Pressure (EOP) Switch









Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Disconnect the Engine Oil Pressure (EOP) switch wiring harness retainer and the electrical connector.

3. Remove the EOP switch.

Installation

1. Install the EOP switch.
- Stage 1: Tighten to 14 Nm (124 lb-in).

- Stage 2: Tighten an additional 180 degrees.

2. Connect the EOP switch electrical connector and attach the wiring harness retainer.