Hood Latch: Service and Repair

Hood Latch Removal and Installation

Removal

1. Hood Latch





1. Remove the bolts (A), then remove the hood latch (B) from the body. Disconnect the hood opener cable (C) from the latch.

2. Disconnect the connector (D).

Installation

1. Hood Latch




NOTE: Apply multipurpose grease to the hood latch as indicated by the arrows.





1. Connect the connector (A).

2. Connect the hood opener cable (B).

3. Install the hood latch (C), then install the bolts (D).

2. Hood Latch - Adjustment

1. Slightly loosen the hood latch mounting bolts (A).






2. Adjust the hood latch (B) to obtain the proper height at the forward edge, and move the hood latch right or left until the striker (C) is centered in the hood latch.

3. Tighten the hood latch mounting bolts to the specified torque.

4. Make sure the hood opens properly and locks securely.





5. Apply multipurpose grease to the hood latch as indicated by the arrows.