Transmission Mode Switch: Testing and Inspection

D3 Switch Test

Removal

1. Center Maintenance Cover





1. Remove the maintenance cover (A).

Test

1. D3 Switch - Continuity Test





1. Disconnect the connector (A).

2. Check for continuity between D3 switch connector terminals No. 1 and No. 2. There should be continuity while pressing the D3 button and no continuity when the D3 button is released.

* If the D3 switch test is OK, the test is finished.
* If the D3 switch test fails, replace the D3 switch.

Installation

1. Center Maintenance Cover





1. Install the maintenance cover (A).