Component Tests and General Diagnostics

Navigation System Forced Starting of the Audio-Navigation Unit

Special Tools Required

- SCS Service Connector 07PAZ-001010A

1. Turn the ignition switch to LOCK (0).

2. Open the glove box, and disconnect the glove box damper from the pivot of the glove box.

3. Connect the SCS service connector (A) to the navigation service check connector (B) located by the passenger's dash.





4. Turn the ignition switch to ON (II).

5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Links menu.

NOTE: If the navigation display fails to display the System Links screen, refer to No picture is displayed troubleshooting Symptom Troubleshooting.