Front Inner Fender Replacement

Front Inner Fender Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or the front bumper.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front wheel Service and Repair.

2. Remove the front inner fender (A).

1. Canada models: Remove the screws (B), then remove the front splash guard (C).

2. Remove the screws (D).

3. Remove the bolts (E).

4. Detach the clips (F, G, H).

NOTE: To release the clips H, pry up on the center pin at the notch (I).





3. Install the inner fender in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.