Air Register: Service and Repair

Driver's Vent Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the driver's middle panel Dashboard Drivers Middle Panel Removal/Installation.

2. Pull out the driver's vent panel (A) to detach the clips, then remove it.





3. Install the panel in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.