Front Inner Fender Replacement

Front Inner Fender Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front inner fender (A).

1. Remove the screws (B, C).

2. Remove the bolt (D).

3. Remove the clips (E, F).

4. Right side: Remove the clips (G).

NOTE: To release the clips E, pry up on the center pin at the notch (H).

Left side





Right side





2. Install the inner fender in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.