Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the reservoir (A).






3. Remove the bracket (B).

4. Remove the fuel pressure regulator (C).

5. Install the parts in the reverse order of removal with new O-rings (D) and new bracket. When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank.

NOTE:

- Do not coat the tank unit base gasket with engine oil.

- Coat the O-rings with clean engine oil; do not use any other oils or fluids.

- Do not pinch the O-rings during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.