Fluid Line/Hose: Service and Repair

ATF Cooler Hose Replacement

Exploded View

With ATF Cooler





Without ATF Cooler





NOTE: When installing the hose clamps, make sure they do not interfere with the surrounding parts.

1. Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list.
With ATF cooler: Align the paint mark (I) upward.






2. Secure the hose with the clip (G), aligning the tab (J) upward.

3. With ATF cooler: Secure the ATF cooler hose with the clamps (K) at the marking (L).

4. Refill the transmission with ATF to the proper level.